Okay if you have just upgraded to windows 10 and are sitting at a black screen for way too long here's the problem and how to fix it.
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.
How to fix this
firstly wait long enough so the mouse cursor to appear when you move the mouse.
(blank screen with a white mouse cursor)
Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows
if the desktop dose not appear after 30 seconds then press Win+P keys, down arrow keys twice, and enter to extend display.
Display Switch - Change Presentation Mode to Project in Windows 10
I hope this helps
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.
How to fix this
firstly wait long enough so the mouse cursor to appear when you move the mouse.
(blank screen with a white mouse cursor)
Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows
if the desktop dose not appear after 30 seconds then press Win+P keys, down arrow keys twice, and enter to extend display.
Display Switch - Change Presentation Mode to Project in Windows 10
I hope this helps
Hello, my name is Jack Sparrow. I'm a 50 year old self-employed Pirate from the Caribbean.
No comments:
Post a Comment